ISM 500
ISM 500
Intelligent warehouse management
The intelligent and dynamic ISM 500 storage system was developed to meet the storage needs of a wide variety of component types. With the ability to configure up to 640 different positions, one can store 7”, 13” and 15” reels, JEDEC pallets, SMT and THT bars, stencil frames and foils, printed circuits, THT components etc.
Dynamic storage system
Equipped with three illuminated LED signals per position, the dynamic storage system shows the location of each component to be retrieved. A false reference is prevented by reading the code of each individual component with a PDA scanner. When storing, the operator only has to read in the component code again and the system suggests a position. Despite this, the operator still has the option of specifying another position of his choice. This enables dynamic position management in order to achieve the best possible use of the available storage space and thus maximum capacity.
flexibility
The various configuration options of the ISM 500 meet the storage needs of a wide variety of component types as well as other tools and consumables in modern SMT production. For example, 7", 13" or 15" rolls, trays, rods, printed circuit boards, prepared feeders, soldering paste or stencil printing frames can be stored in up to 640 configurable positions.
humidity control unit
The ISM 500 is equipped with a humidity control unit that controls and monitors the indoor air to maintain a maximum humidity level of less than 5%. This makes it possible to store all sensitive components correctly and thanks to the software interface, the condition of each component can be monitored with regard to humidity. The system tracks every movement and automatically calculates the exposure time outside the boundary. The operator receives appropriate information and the component is blocked if the maximum time has been exceeded.
error elimination
Monitored warehousing prevents human assignment errors. Any sources of error are completely eliminated, since each material must be read in and verified in this way using a PDA scanner both when it is stored and when it is removed from storage. In addition, the internal system software can report stored material and possible missing parts to the in-house ERP system at any time.
