Tibbo Technology Inc

Programmable IoT Module EM2000

Programmable IoT Module EM2000 is a full-featured Tibbo BASIC/C-programmable IoT Module with four UARTs and Ethernet, as well as optional Wi-Fi* and GPRS** connectivity. This module offers substantial speed and functionality improvements over its predecessor, the original EM1000 device.
 

The capabilities of this module are enhanced by the onboard flash memory hosting a hardened fault-tolerant file system, as well as the EEPROM and RTC. The EM2000 has 56 general-purpose I/O lines and can control and externally attached LCD, keypad, buzzer, card readers, serial devices, and other circuitry.

* Requires the GA1000 Wi-Fi add-on, which can be connected externally or piggybacked on top of the EM2000 ("EM2000G" ordering code).

** Requires a standard GPRS modem (i.e., Simcom's SIM900) to be connected to a UART of the EM2000.

Key Features:
 

• High-performance ARM CPU
• 10/100 Base-T Ethernet port (no RJ45/magnetic)
• Optional Wi-Fi connectivity (with the GA1000 add-on)
• Optional GPRS connectivity (requires an external modem)
• 4 UARTs support serial, Wiegand, and clock/data streams
• 56 general-purpose I/O lines (5V-tolerant)
• Can drive externally connected buzzer
• 4-channel ADC

Specifications:
 

• 32-bit architecture
• Powered by Tibbo OS (TiOS).
• 10/100BaseT auto-MDIX Ethernet port (no magnetic)
• Optional Wi-Fi interface (requires the GA1000 add-on module).
• Can control a GPRS modem* (such as the SIM900).
• 56 general-purpose I/O lines; 8 lines can work as interrupts.
• Square wave output (can be used for buzzer* control)
• 4-channel ADC
• 4 synchronous serial ports with SPI and I2C modes