Gasbarre Products, Inc.

PTX High-Speed Powder Compaction Presses

A complete line of high-speed and high-precision powder compacting presses, robotic parts loaders.

Anvil-Type Presses

Our anvil-type presses are designed for high-pressure applications within a small volume. When you purchase one of our anvil-type PTX presses, you’ll experience all of the following features:

• High-speed compacting of parts with one flat side
• Parts can be thick or thin, have holes, teeth, etc
• Parts are compacted against an anvil by the upward action of a lower punch
• Our patented Unitized Anvil design combines the powder feeder, anvil and vacuum pick up into one unit which is always in contact with the die plate
• Virtual elimination of powder spillage
• There are no upper punches and associated problems of misalignment, breakage and wear

Opposed Ram Type Presses

These press types allow compaction from both ends of the tool cavity to ensure even density for even the thickest compacts. Other uses and applications of our opposed ram presses include:

• Specially designed for multiple cavities, high-speed, complex, and multi-level precision parts.
• Powder transfer from top and bottom punches, a pre-press with the top punch, and a top punch hold-down system.
• With a standard removable tool set – tool assembly is done off-line and can be replaced and adjusted within about 15 minutes.
• The same toolset may be used for a wide variety of parts. 
• The Multipak conventional press may also be used in ‘Anvil Press’ mode.