130 SBER
130 SBER
Semi-automatic Tyre Mounting Machine
Semi-automatic assembly machine
• Ergonomic, manual loading concept
• Small footprint for a reduced space requirement
• The machine provide capabilities for the mounting of Runflat tires
- No foundation required for installation
Range of application
This machine, type 130 SBER, is designed for manual feeding and assembly-appropriate overlaying, soaped tires and rims, as well as automatic mounting of the tires on disc wheels in low-profile design in unsorted mixed operation without rim touch.
The soaping of tires and disc wheel as well as the loading of the machine-side conveyor system is ensured by operating personnel. The loading and unloading of the assembly station takes place automatically.
The system can process tires in diagonal, radial and low-profile design as well as steel and light-alloy disc wheels in mixed operation.
Design
• Direction of conveying viewed from the operator side: from left to right• loading station• Disk Wheel detection station: Determine rim diameter and rim width• Assembly station: Clamp the disc wheel on the lower horn, press the tire beads on one side into the drop center.• Disc wheel tire transport: Swivelling double material conveyor• Safety device: Safety fence with two electrically and mechanically locked doors
Special features
• Servo-hydraulic or servomotor actuation of the assembly tools• Due to the special design and servo-technical operation of the assembly tools individual programming is possible for a wheel / tire-type-dependent assembly process. Balancing in two levels or separated according to static unbalance / torque unbalance possible• Servo control allows specific parameter documentation of the assembly programs• Gentle torque-controlled assembly process, especially for wide tires and Run Flat tires
