Residual Biogas Burner – FLARE F
Residual Biogas Burner – FLARE F
BASIC DESCRIPTION AND FUNCTION OF BURNERS
Automatic gas burners of the series APH-M guarantee the burning, while burning low-pressure and medium-pressure propane, propane-butane, biogas, sewage and degasation gas. Burners comply with technical requirements ČSN EN 676, ČSN 07 5801; consequently, they can be used for broad spectrum of burning and technological equipment. Emission values do not exceed limits specified by the government decree no. 352/2002 Coll. In relation to the requirement of the law no. 22/1997 Coll., the independent authorized body (AO 202) evaluated the compliance with selected standards and technical instructions, and declaration of conformity was issued for them.
Burner operation is fully automatic, not demanding any permanent attendance, only temporary supervision. Continuous control of heat output and low air excess in burning guarantee high economy of the operation. From design point of view, the burners are designed as complex unit, i.e. fan supplying the combustion air is contained directly in the body of the burner.
Cooling of combustion chamber is solved by the air blown by the fan into the spiral header around the casing of combustion space.
Burnt medium: biogas
Operating overpressure: 3,0 (1,5-5)kPa, resp. 20 (5-50) kPa
Equipment output: 80, 110, 260, 500 m3·h-1 with overpressure 2,0 kPa
Max. heat output: by type
Combustion burner - overpressure
Flame ignition: by high-voltage spark
Flame monitoring: ionisation probe
Control method: jump – acc. to demanded output from incoming signals from superior system
Distribution system: 3 PEN 50 Hz, 400V/230 V
Installed input: by type
Protection: against contact voltage acc. to ČSN 33 2000-4-41
APPLICATION
Flera serves for the burning of waste gases or gases redundant within the shut-down of combined units. Such equipment can burn for example biogas, landfill or sewage gas.