PBS Power Equipment, s.r.o.

PBS Power Equipment, s.r.o.

Průmyslová 162 674 01 Třebíč Czech Republic

Power industry Burners

Power industry Burners

Power industry Burners

BASIC DESCRIPTION AND FUNCITON OF INDUSTRY BURNERS

INLET TECHNICAL PARAMETERS

Main fuel liquid light, medium and heavy fuel oil, naphtha, combustible refinery plant products

Main fuel gaseous natural gas, coal gas, degazační, coke oven and blast furnace gas, biogas, waste gases

Combustion air temperature 20 – 300°C, overpressure against combustion chamber with nominal output 1,6 – 2,5 kPa, quantity in dependency on the burner output and type of fuel

Ignition fuel gaseous stage PB resp. natural gas with pressure 50 – 80 kPa, coal gas resp. coke oven gas with pressure min. 4 kPa, quantity max. 15 Nm3/hour -short term

Press. control air clean, dry, with overpressure 0,6 MPa, quantity max. 2 Nm3/hour - short period

Electric power protected supply 3f 400/230V, 50 Hz for electric motors, 1f 230V, 50 Hz for control members of burner. UPS in case of the requirement of the maintaining of operation in short-term outage of electric power. Inputs per output and design of burner and fuel parameters.

Spraying steam only for oil burners with steam spraying, overpressure 0,6 – 1,2 MPa, slightly superheated

Steam for heating of liquid fuel to viscosity needed for optimal spraying

OUTLET TECHNICAL PARAMETERS

Heat output per assignment in the scope 4 – 80 MW. Burners are delivered in design with automatic control, where the output is controlled on the basis of the evaluation of demanded quantities, for example steam pressure, water temperature etc. Control of the rate of fuel and air is guaranteed by mechanical or electronic link.

Output control range 25 – 100% for burners gas and oil with steam spraying, 33 – 100% for oil burners with pressure spraying

Current air excess 1,05 for burner nominal output

APPLICATION

Output burners are produced in the versions for liquid fuels, gaseous fuels or as combined burners. Their use is possible in the output applications, for ignition and stabilization, or for any other special applications. Furthermore, the installation of several burners into common air box is possible, too.

Product Enquiry

SSL Secure Connection