BROSA GmbH

BROSA GmbH

1 d Dr Klein Stra├če, Tettnang, Baden-Wuerttemberg, 88069, Germany

XY force measuring axis

XY force measuring axis

XY force measuring axis

BROSA XY force measuring pins are a further development of the proven BROSA force measuring pins. They enable the resulting force to be determined as a function of the forces in the X and Y direction. The complexity of the design can be further reduced by integrating two measuring systems. This reduces possible parasitic influences to a minimum.

There are different applications in which our force measuring pins are used:

  • pulleys
  • rope endpoints
  • landing gear
  • mechanical engineering
  • Hydraulic / pneumatic cylinder

In addition to a customer-specific design, our force measuring pins have other features as standard:

  • Integrated amplifier (4-20mA, CANopen, optional CANopen Safety)
  • Durable design
  • Temperature compensated from -40...+80°C
  • High EMC resistance of 200V/m 
  • No zero point drift, ie no recalibration required 
  • Constant accuracy over the entire temperature range
  • Design for tensile and / or compressive forces
  • Limiting load 150% and breaking load 300% of the nominal load
  • Safety classification PL c / SIL 1
  • Protection class IP66 / IP67 according to DIN EN 60529
  • Calibration in simulated installation situation, including test report

Optionally, our sensors also offer the following advantages:

  • Increased limit and breaking load, e.g. 300 / 500%
  • Immune to interference from magnetic fields up to 300 mT
  • Redundant execution
  • Performance level d (e) according to ISO 13849
  • SIL 2 (SIL3) according to IEC 61508
  • Protection class IP69
  • Customized connectors (cables and connectors)

Product Enquiry

SSL Secure Connection