2G Engineering

2000 Series Subsea Rotary Actuator

2000 Series Subsea Rotary Actuator

3 Material Compositions

The 2000 Series rotary actuator is available for ordering in aluminum, stainless steel or titanium construction, depending on project application and requirements.

50 Ft-lbs of Torque

Combine intelligence with the raw power of 50 ft-lbs maximum output force, which can be controlled via the software management system.

IP69K Rated

The 2000 Series meets the IP69K rating to provide total protection from water and dust ingress and steam-jet cleaning, as well as many other subsea conditions.

150+ Hours Tested

Our dedicated team of test engineers run the actuator through a rigorous series of tests to validate performance under simulated environmental conditions.

General Specifications

• Absolute angle feedback and turn counting
• Maximum rotational force 10 ft-lbs(High Speed model)
• Maximum rotational speed 60 RPM at 24 V(High Speed model)
• Maximum rotational force 30 ft-lbs(High Torque model)
• Maximum rotational speed 9 RPM at 24 V(High Torque model)
• Brushless DC motor
• Oil-filled - self-contained - compensated

On-Board Motor Driver & Servo System

• Configurable current limits, power, and speed
• RS-232 & RS-485 serial interface
• Optional Analog, Modbus, or CAN Bus
• Contactless, non-wearing, absolute position angular encoder
• Does not require homing
• 0.1 degree resolution

Available Materials

• Grade 5 - Titanium
• 316 - Stainless steel
• 6061 - Aluminum - Black

Operating Conditions

• Voltage 12 32 V DC nominal
• Operating depth greater than 10,000 ft
• Operating temperature range: -20°C to 65°C
• Storage temperature range: -30°C to 85°C

Current Draw at 24 V DC

• Idle current = 0.03 A
• Motor ON braking = 0.12 A
• Max torque @ Stall = 5 A
• 40 RPM at 4 ft-lbs = ~1.8 A(High Speed model)
• 5 RPM at 5 ft-lbs = ~1 A(High Torque model)

Shaft Loads

• Radial - 25 lbs max
• Thrust - 10 lbs max