Palletized Drum & IBC-Tote Filler
Palletized Drum & IBC-Tote Filler
The most versatile and widely accepted filling machine is this palletized drum and IBC/tote filler. It is both a top and sub-surface liquid filling machine for filling a pallet of drums or a single IBC/tote ranging from 5 to 550 gallons.
Product Details: Item No. 102
Model: DF-5540
Capacity: 3, 4, or 5 drums per pallet or an IBC
Container: 5 to 55 gallon drums or 275 to 550 gallon IBC’s, containers 20” to 80” tall
Material: Carbon or galvanized steel construction, all wetted parts use 316 stainless steel
The most versatile and widely accepted filling machine by the chemical, cleaning and coatings manufacturers is this palletized drum and tote filler. This is both a top and sub-surface filling machine for filling a pallet of drums or a single tote. Our filling machine has an inner mast within the stanchion that rises up and down adjusting the boom and lance to the height of any container, ranging from 5 to 550 gallon, or 20″ to 80″ tall. All the necessary controls to operate the filler and conveyors are on the handle in front of the operator.
Operation
This model DF-5540 is a top and sub-surface filling machine for containers from 5 to 550 gallons, or 20″ to 80″ tall.
- A load of empty containers conveys to the fill station and stops automatically by photo eye
- By pushbutton, the boom is released for the operator to guide the lance to the bung opening of any drum or container
- When the operator releases the button, the boom is automatically locked in place
- By pressing start, the lance travels to the bottom of the drum, if in sub-surface mode
- The machine automatically zeros the tare weight before the fill cycle begins
- When the liquid reaches the lance tip the machine automatically shifts into fast fill cycle
- Near the top, the machine cycles to slow speed to top off the drum and minimize foaming
- When filled to the designated weight, the lance automatically retracts to its home position
- The operator presses the button to release the boom and guide the lance to the next drum
- When all containers are filled, a button will drive out the full and drive in a new load
This is a model DF-5540, a sub-surface and a top-fill machine
- Lance and all other wetted parts are 316 stainless steel
- Two infeed full-port ball valves prevent product hammering
- Scale is a 5,000 lb capacity platform type
- Controller is an Allen Bradley PLC with a 250 product menu
- Touch screen is an Allen Bradley color Panel View
- Filler has a three speed filling cycle; slow/fast/shot, if needed
- Air operated drip pan with a UHMW wiper ring
- Fume hood under the lance housing for vapor collection
- Air cylinder to raise and lower the fill lance
- Heavy duty brakes for boom position locking
- NTEP approved scale and weight meter
- NEMA 4 standard enclosure, others optional
- Communications port for interface with Drum Filler in the Cloud
- Filler will automatically zero the tare weight before the fill cycle
- Operator troubleshooting interface with prompts
- Automatic abort if lance is not aligned with bung opening
- Rugged, all-welded structural steel, painted stanchion
- Fills a 55 gallon drum with water in 45 seconds at 80 gallons/minute
Specialty Equipment manufactures fillers and conveyors with structural steel stanchions, frames and supports welded together, making each section a one-piece superstructure, the most rugged standard in the industry.
