pressure controller pc-pcd series
PC Series Single Valve Pressure Controller
Features
- Available for gauge and absolute pressures up to 500 PSI / 35 Bar
- Differential pressures up to 150 PSI / 10 Bar
- 50-100 ms speed of response stills upstream fluctuations
Alicat PC series of pressure controller maintain precise control in your absolute, gauge of differential pressure applications. Additionally they can be configured for either a vacuum pressure or back pressure control.
The PC series pressure controller is repeatable and accurate with calibrations up to +/- 0.125% of full scale accuracy. Every PC series controller has a 1/8” NPT female connection and are typically suited to low flow pressure applications.
Every Alicat pressure controller has a 200:1 turndown ratio with many standard pressure ranges available, standard pressure units include PSIA, PSIG, mmHG, inHG, inH2O, mBar, Atm, Torr and kPa.
The digital pressure controller features a local LCD screen and push button user interface to change process variables. A colour TFT display is also an option to.
RS-232 communications are standard as well as an analogue output signal such as 0 – 5 VDC. Modbus-RTU, available over RS-232 or RS-485 and PROFIBUS protocols are available as an option.
Every Alicat single valve pressure controller is backed by the manufactures limited life time warranty and ships with a NIST traceable calibration certificate.
Other features
- Downstream valve, optimizes control for backpressure applications
- ATEX Zone 2 Area Classification, permits operation in hazardous environments
- 9-pin or 15-pin D-sub connectors, configured to match any existing pinout
- Accessible PID valve tuning for best speed and stability
- Custom valve orifice sizing yields full-range stability
PCD Series Dual Valve Pressure Controller
Features
- PCD Series Dual Valve Pressure ControllerAvailable for gauge and absolute pressures up to 500 PSI / 35 Bar
- Differential pressures up to 150 PSI / 10 Bar
- 50-100 ms speed of response stills upstream fluctuations.
- Dual valve for standard closed volume applications
Alicat PCD series allow for stable and response control within closed volumes, they reduce wasting costly gases as there is no continuous bleed valve. PCD series incorporates a second, independently controlled exhaust valve that actuates only when the pressure needs to be reduced, minimising the amount of gas venting.
The PCD series Alicat dual valve pressure controller is repeatable and accurate with calibrations up to +/- 0.125% of full scale accuracy. Every PC series controller has a 1/8” NPT female connection and are typically suited to low flow pressure applications.
Every Alicat pressure controller has a 200:1 turndown ratio with many standard pressure ranges available, standard pressure units include PSIA, PSIG, mmHG, inHG, inH2O, mBar, Atm, Torr and kPa.
The digital pressure controller features a local LCD screen and push button user interface to change process variables. A colour TFT display is also an option to.
RS-232 communications are standard as well as an analogue output signal such as 0 – 5 VDC. Modbus-RTU, available over RS-232 or RS-485 and PROFIBUS protocols are also available.
Every Alicat device is backed by the manufactures limited life time warranty and ships with a NIST traceable calibration certificate.
Applications
- High-Efficiency Helium Leak Testing
- Stable control of pressures in closed systems without continuous gas bleeding.
Other features
- ATEX Zone 2 Area Classification, permits operation in hazardous environments.
- 9-pin or 15-pin D-sub connectors, configured to match any existing pinout.
- Accessible PID valve tuning for best speed and stability.
- Custom valve orifice sizing yields full-range stability