VIP EVO PN40 - 580 psi
1. Internal geometry studied to reduce pressure drop.
Fluid dynamic of internal of valve studied to maximize flow capacity.
2. Pneumatic actuator integrated in the valve.
Space saving compared to an automated valve.
3. Piston with chemical nickel plating (20-25 micron).
Lower wear of the seals due to the increase of the surface hardness (400 -550 HV).
4. Lip seals.
Less wear of the seal compared to an o-ring.
5. Lip seal leakage check holes.
These holes show eventual leakage from lip seal, preventing the intercepted fluid from damaging the air supply system.
6. Seat support disc.
316L S.S. disc for best chemical compatibility.
Several seal materials available.
Maximum compatibility with different types of fluids depending on the seals used (EPDM, NBR, FKM).
Integrated slot for valve position sensor.
Position sensor can be easily mounted in both sides of the valve to minimize space.