J. D. Gould Company, Inc.

M43V Solenoid Valve

General Specifications

• General Purpose Valves
• Internal Piston-Pilot Operated
• 2-Way
• Full Ported
• Packless
• Bronze Body
• Normally Closed (Energize to Open)
• Viton® Leakproof for Positive Shutoff
• Pressures to 250 psi

SERVICE RATINGS

• Pipe Sizes Available: 1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1”, 1¼”, 1½”, 2” NPT (Must Specify)
• Media:
• Water
• Air
• Inert Gases
• Light Oils (Max Viscosity – 15W SAE, 225 SSU) & other non-volatile; non-corrosive fluids
• Pressure Range: 5 – 125 psi OR 10-250 psi
• Minimum pressure drop of 5 or 10 psi (ΔP) required for proper operation. For optimal valve operation, specify your actual pressure range.
• Select the Maximum Pressure Rating closest to but not exceeding the actual pressure under which the valve will operate (Example: offered ranges are 5-125 psi or 10-250 psi. Your cooling jacket application has a Maximum Pressure of 70 psi > pick the 5-125 psi rated valve).For more details Consult our Valve Specialists @ 800.634.6853
• Rated Fluid Temperature Range: -40° F to +220° F
• Voltages Available (Must Specify):
• 12, 24, 120, 240, 480 VAC  50-60Hz  26 Watts Max
• 6, 12, 24, 48, 115, 230 VDC              24 Watts Max
• Coil Specifications: NEMA 4X  Waterproof Corrosion Resistant Coil – Continuous Duty Polyester, Thermoset Epoxy Molded with 18” Leads and ½” Conduit Connector
• Insulation: Class H  (220°F Maximum Fluid Temp @ 77°F Ambient)

Valve Construction

• GLOBE BODIES are Sand Cast Bronze – Max Rated Pressure: WSP 200 – WOG 400
• BONNET ASSEMBLIES are 304 SS Tubes with Brass Tube Plugs Silver-soldered to a Brass Bonnet. BONNET O-RING is Buna.
• PISTON ASSEMBLIES are Brass with Brass SEAT SCREWS with a Viton® Insert and 316SS EXPANDER RINGS behind Glass & Moly-Filled Teflon® PISTON RINGS plus Buna SEAT DISC and Brass or Bronze GUIDE NUT.
• PILOT VALVE ASSEMBLY is 416SS and PISTON SPRING is 302SS.

MOUNTING & SERVICE

• Installation: Valves must be mounted in horizontal pipe with coil vertical, upright and on top. A 40–mesh inline strainer is recommended ahead of the valve.
• Maintenance: As with any piece of equipment, reasonable inspection and maintenance of components should be periodically performed. Frequently check operation, cleanliness and internal wear. Any questions, consult factory.

NOTE: Gould Solenoid Valves are designed for Industrial–Commercial applications. Residential/Consumer applications will void the warranty. Questions ~ Call our Experts.