ZLS-Safety Rope Switch
Safety rope switches immediately switch off the machine drive if the rope is pulled or there is a tear in the rope. This condition remains locked till the reset pushbutton is pressed when the rope is under correct tension.Different variants are available for different rope lengths. An additional emergency stop key can be mounted on both sides of the switches.With the ZANDER assembly / rope tensioning system ZTK, the pre-tension of the rope can be easily set so that green arrows are visible in the display window of the safety rope switch. This simplifies the assembly, troubleshooting and maintenance procedures.
Feature
Value
ZLS
Applications
Protection of large hazardous zones, e.g.
conveyer belts, extrusion plants and cutting machinery
Certified according to
IEC 60947-5-5, IEC 60947-5-1, EN 60947-5-5, EN 60947-5-1,
EN 60204-1, ISO 13850
Approvals
CE, TUV
Safety contacts
3 NC / 1 NO
Contact rating, minimum load current
AC-15: 3 A / 240 V; DC 5 V / 10 mA
Typical operating force, rope pulled
Rope spans
80 m
Ambient temperature
-25 °C to +80 °C
LED
DC 24 V
Red flashing or steady - unsafe condition
Green steady - safe condition
Housing
Die-Cast, painted yellow
IP Rating
IP67
Mechanical reliability
1.5 x 10⁶ operations
Approx. weight
820 g
Order No.
940010
Sincerely Plantautomation Technology
Regards,
Client Success Team (CRM),
Please fill the all required fields....!!
