USB3 Vision Processing Unit
Part Number: AS-LM01-CME-SYS-A
The USB3 Vision Processing Unit has been custom designed for a specific medical application in the field of computer vision assisted surgery. The unit has four inputs for USB3 VisionTM cameras and four 3G-SDI outputs arranged as two channels of 3G-SDI video, each with a duplicate output. The unit satisfies various medical and quality standards and is designed for long term use in an environment where high reliability and ease of use are paramount.
A development port provides interfaces for keyboard, mouse, monitor and network which may be conveniently closed-off for runtime embedded use.
Specification Summary
Processor:
COM Express Type 6 module utilizing an Intel i7-4700EQ processor. Other processor options available on request.
Memory:
2 x 8GB DDR3 1600.
Hard Drive:
1 x 120GByte SSD.
USB3 (for cameras):
4 x USB 3.0 ports designed to support USB3 Vision cameras via PCIe/104 expansion card. (Active Silicon part number: AS-FBD-4XUSB3-5-104-2PE2)A dedicated power supply for USB VBUS provides each USB 3.0 port with a nominal 5.1V at 900mA. To cope with very long cables, this voltage can be increased as a hardware option.
USB3 (general purpose):
2 x USB 3.0
3G-SDI outputs:
4 x 3G-SDI outputs using BNCs connectors arranged as two pairs such that each pair has the same data on each output.
RS-232:
1 x RS-232 port.
Reset Connector:
3-pin connector for standard PC reset/reboot and power down.
LEDs:
5 x 3mm bi-color green/red LEDs for user status feedback.
Development Port:
1 x GigE network, 1 x DisplayPort and 2 x USB2. (Under panel marked “Factory Use Only”.)
Earthing Point:
M4 threaded blind hole, 7mm minimum thread depth.
Expansion Options:
PCIe/104 format expansion slot pre-fitted with 4-port USB 3.0 Host Controller.
Sincerely Plantautomation Technology
Regards,
Client Success Team (CRM),
Please fill the all required fields....!!