APCe8650 Non-intelligent PCI Express Bus Carrier
APCe8650 Non-intelligent PCI Express Bus Carrier
Product short description:
- Non-intelligent PCIe bus carrier
- Holds four IP modules
- Plug-and-play carrier configuration and interrupt (MSI and INTA#) support
- Two interrupt channels per IP module
- Supervisory circuit reset generation
This board interfaces standard Industry Pack (IP) mezzanine modules to a PCI Express bus on a PC-based computer system.
Description
APCe8650: Non-intelligent PCI Express Bus Carrier Description
This board interfaces standard Industry Pack (IP) mezzanine modules to a PCI Express bus on a PC-based computer system.
Four IP module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, serial I/O, etc.) on a single board. Or, combine modules of the same type for hundreds of channels on a single card. Either way, the APCe8650 saves your precious card slots and reduces your costs.
Select I/O modules from Acromag’s offering of more than forty models or use any third-party ANSI/VITA 4 compliant IP modules.
The APCe8650 card is a Peripheral Component Interconnect Express (PCIe) bus card and is a carrier for the Industrial I/O Pack (IP) mezzanine board field I/O modules.
The carrier board provides a modular approach to system assembly, since each carrier can be populated with any combination of analog input/output, digital input/output, communication, etc. IP modules.
Thus, the user can create a board which is customized to the application. This saves money and space – a single carrier board populated with IP modules may replace several dedicated function PCI or PCIe bus boards.
The APCe8650 non-intelligent carrier board provides impressive functionality at low cost.
APCe8650: Non-intelligent PCI Express Bus Carrier Performance Specifications
IP Module Compliance
Meets or exceeds all written IP specifications per ANSI/VITA 4-1995 for 8MHz or 32MHz operation. Supports Type I and Type II ID space formats.
Electrical/mechanical interface: Supports four single-size IP modules (A-D).IP module I/O space, ID space, INT, and MEM space supported.
IP module I/O space: 16 and 8-bit; supports 128 byte values per IP module.
IP module ID space: 16 and 8-bit; Supports Type I 32 bytes per IP (consecutive even byte addresses) and Type II 32 words per IP via D16 data transfers.
IP module memory space: 16 and 8-bit; supports up to 8M bytes of memory space per IP module.
Interrupts: Supports two interrupt requests per IP and interrupt acknowledge cycles via access to IP INT space.
PCI Express Bus Compliance
This device meets or exceeds all written PCI local bus specifications per rev. 1.1 dated March 28, 2005.
System base address: This board operates in PCI memory space. It requires 256 bytes for mapping the PCI configuration registers and 64M bytes for IP module ID, IO, INT and memory space.
Data transfer bus: Slave with 32, 16, and 8-bit data transfer operation. 32-bit read or write accesses implemented as two 16-bit transfers to IP modules.
Interrupts (PCI bus INTA# interrupt signal): Up to two requests sourced from each IP mapped to INTA#. Interrupt vectors come from IP modules via access to IP module INT space.
Physical
PCIe x1 lane
Length: 12.283 inches (312.0 mm).
Height: 4.380 inches (111.25 mm).
Board thickness: 0.062 inches (1.59 mm). Max. height under IP modules: 0.110 in. (2.80 mm).
Connectors: A-D (carrier field I/O): 50-pin male header.
Power: Auxiliary 12V power.
Environmental
Operating temperature: 0 to 70°C (APCe8650) or -40 to 85°C (APCe8650E model).
Storage temperature: -55 to 100°C.
Relative humidity: 5 to 95% non-condensing.
