Acco Speedway Wire Rope Hoist
Acco Speedway Wire Rope Hoist
AMERICAN MADE - MADE IN THE USA
Capacities from 1 to 5 Ton Capacity
Standard Features:
BASIC CONTROLSStandard Acco Hoist controls come in single and two speed configurations. Magnetic reversing contactors, both mechanically and electrically interlocked. 115V control circuit. Meets NEC requirements. NEMA Type 3R enclosure. Lightweight, durable and easily accessible.
MOTOR BRAKEAcco Hoists are equipped with a motor brake that is proven in millions of hours of in-service operation, the original Wright A-C magnetic-actuated disc brake delivers rapid stops with virtually no hook drift. Rated a minimum of 150% of full load motor torque.
MOTORThe Acco New Century Series Wire Rope Hoist utilizes a U.S. manufactured motor. 30 minute duty, Class F insulation. Standard single speed motor is povided for 230/460 or 575 3 phase, 60 hertz power supplies. Motor thermostats are standard - providing both running and overcurrent protection.
DRUMEach Acco Wright Wire Rope Hoist has machined grooved and large flanges for smooth winding and extra rope life. At least two full turns of rope remain on the drum at the low hook position.
LIMIT SWITCHEach Acco Hoist has a gravity type upper hook travel limit switch comes equipped with an automatic momentary lowering circuit.
LUBRICATIONAll Acco Hoist gears operate in the largest oil reservoir in the industry and are enclosed in a rugged fluted aluminum alloy housing. The oil bath and housing combine to provide rapid heat dissipation, an important aspect of achieving the high volume hoist duty of an H4 classification. Oil sight gauge on housing cover permits quick visual inspection.
MECHANICAL LOAD BRAKEAll Acco Wire Rope Hoists are equipped with an automatic Weston Type multiple disc brake, carried forward from the original Work Rated design. The mechanical load brake can hold a full capacity load independent of the motor brake and assures that the load does not accelerate while being lowered. Adjustment of the Acco Hoist mechanical load brake is not required.
GEAR TRAINAll Acco Electric Wire Rope Hoists are equipped with quiet, helical and spur gearing. All gears are machine cut, case-hardened alloy steel with shock-resistant ductile cores. Designed to AGMA standards.
BEARINGS - SPIDER RETAINERAll Acco Hoists are equipped with precision heavy-duty ball bearings support all shafts. Bearings at outboard ends of shafts are held in place by a heavy-duty Spider Retainer. This allows removal of Gear Housing for inspection (after draining oil). All internal parts remain in place and can be operated for inspection.
WIRE ROPEPre-formed wire rope, of hoisting service construction, has swaged fitting on both ends for ease of replacement if necessary.
LOAD BLOCK - HOOKDrop forged heat-treated steel hook swivels 360 degrees on a shielded roller thrust bearing and comes equipped with a spring latch. Work can be performed on the load block without removing wire rope from drum. Steel sheaves are standard.
