Sensit s.r.o.

DIGITAL THERMOMETERS WITH DISPLAY

These thermometers are made i 5 versions:

The TDi version is fitted with a programmable converter for a 4 - 20 mA current loop. Buttons enable the setting of certain parameters of the current loop on display (e.g. temperature unit).

The TDu version with a voltage output of 0 - 10 V or 0 - 5 V (three-wire connection). With the help of the buttons you can set the parameters for the voltage output or units on the display. On request, it is possible to add two switching semiconductor switches.

The TDs version with only a switching contactless 30 V/500 mA switch. By using the buttons you can set the parameters of switching and the units od the display.

The TDb battery-powered version. It does not have analogue or switching output. The thermometer is generally in sleep mode and data appears od the display for approx. 10 sec. Moreover, in this version you can select certain parameters of display, such as the temperature unit or minimum or maximum temperature value.

The TDd version with RS232 or RS485 (three-wire) serial digital output. This version enables the use of 1 switch. The communication protocol is ASCII or MODBUS RTU.