Deep Groove Ball Bearings
Deep Groove Ball Bearings
The deep groove ball bearings are non – separable bearings. These bearings can take radial & axial load and can run at high speed. They are available as plain or sealed bearings. The bearings are economically prized and hence most widely used. The bearings are available in metric and inch series.
Angular misalignment capability of these bearings are very limited, hence while mounting bearing positioned must be perfectly aligned in housing and shaft. Minimum load of P/Cr >0.01 is required for these bearings for smooth and slippage free operation.
Single Row Deep Groove Ball Bearings With Shield/Seal
A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the moving parts of the bearings – the inner and outer part of the bearings. The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. Ball bearings are of simple design, durable in operation and easy to maintain.
They are available in single and double row designs and in open and sealed variants. Due to their low frictional torque, they are suitable for high speeds. NBC bearing manufactures a wide range of both metric and inch series deep groove ball bearings, angular contact ball bearings, self-aligning ball bearings among others, including Thermo Mechanical Bearings (TMB) for longer life and special heat-treated bearings for dimensional stability at high temperatures.
Double Row Deep Groove Ball Bearings
Double row ball bearings are available in 62 & 63 series. The load carrying Capacity of these bearings are more than single row. The bore and outer diameter dimensions are same. Width is slightly bigger than single row.
