Maxi-Lift, Inc

Maxi-Lift, Inc

16400 Midway RoadAddison, TX 75001USA

HD-STAX

HD-STAX

HD-STAX

  • Patented, Heavy Duty Design
  • Nests for Economical Packing and Shipping
  • Thick Wear Lip and Corners
  • Stocked Around the Globe
  • Calumet Shape for Clean Filling and Discharge

The HD-STAX is a patented stackable elevator bucket designed for long life, more capacity, and economical shipping. Designed to stack (nest) together, the HD-STAX gives you almost 3 times more buckets per skid and container. The HD-STAX buckets slide together to provide up to 60% space reduction for storage and shipping resulting in lower costs.

The HD-STAX also features a thicker, heavier wear lip molded across the front and sides of the bucket, for a tougher, stronger and longer lasting design. The wear lip is almost 2” tall, and is thicker in the corners to give you sustainable life when used in tough agricultural applications.

HD-Stax Low Profile Option

A reduced height for closer vertical spacing allows more buckets per foot of elevator belt. When upgrading to HD-Stax Low Profile buckets, horsepower requirements must be evaluated due to increased capacity.

Other Considerations

DRILLING: Elevator buckets are manufactured without a drill pattern. Special drilling or punching can be accommodated upon customer request.

VENTING: Available as needed. See venting options in our catalog.

DIGGER BUCKETS: Use slightly larger metal digger elevator buckets to help loosen material in the elevator boot section that has set up or hardened, thereby reducing abrasion on the plastic buckets. Call for details on Metal Digger elevator bucket options.

SPACING: See elevator bucket spacing details in the size chart (depending on materials and speeds, smaller and larger spacing may be used).

INSTALLATION: Use a #1 standard elevator bolt or Sabre-Tooth elevator bolt for installation. Designed to be used with fender or flat and lock washers and hex or locking nuts. If buckets are being installed on chain, use hex head bolts, nuts and washers.

FDA: Both the urethane and polyethylene are designed to FDA specifications for direct contact with food products.

Product Enquiry

SSL Secure Connection