Horizon PSI

Rotary Airlock DT Series

The Rotary Airlock DT Series meters product out of a hopper while isolating the air pressures on either inlet or outlet of the airlock. A typical applicaton for an airlock is to meter product into a convey line. This high performance rotary airlock/feeder offers the following features: high filling efficiency, sheared angle inlet and minimum air leakage. Shaft seals are suitable for products up to a temperature of 300 degrees with a maximum pressure differential of 29.4 PSIG (2 Bar).STANDARD CONSTRUCTION FEATURES

• Cast iron housing and end plates – Class 40, 220 Brinell
• 9-Vane open ended, carbon steel, rotor consisting of >1/4” and
  • Sheared angle inlet
  • Maximum pressure differential of 29.4 PSIG
  • Class I clearances (0.004” to 0.005”) between the rotor and the housing/end plates
  • Outboard ball bearings, factory lifetime lubricated, with felt seals and concentric locking collar – 3000 F maximum operating temperature
  • External, packing gland type seals
  • Standard Grey enamel exterior