Garnet Technology

IP-500G

IP-500G

WiFi IP communicator for Garnet line panels

The IP-500G is a WiFi communicator that allows the connection of the A2K4-NG, A2K8 and PC-732G panels to the Internet. It connects to the C-485 data bus and allows reporting to a monitoring station as well as self-monitoring reporting. With the use of this communicator it is possible to use an exclusive App (Garnet Control) that enables remote control, automation and camera viewing. The IP-500G allows full programming via App Garnet Programmer through an AP connection.

Characteristic:

• Compatible with A2K4/A2K8 (Version 2.8 or higher) and PC-732 (All versions)
• Transmission: Wi-Fi certified 2.4Ghz, IEEE 802.11.
• FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC Certificate
• Transmit Power: 20.5dBm
• Wi-Fi authentication via WEP, WPA-PSK and WPA2-PSK.
• Antenna: PCB trace type.
• 2 IP recipients for monitoring reports.
• Allows self and panel programming with AC4 software
• Allows APP programming in AP mode from the Garnet Programmer app
• Reports with residential format.
• You can use domain names instead of IP addresses.
• Connection with dedicated Bus (BUS-T485).
• Up to 20 residential users for remote control/reporting.
• Allows remote operation of the system via smartphone using the Garnet Control App
• Report communication using UDP (with/without encryption).
• Supervision period configurable from 1 to 99 minutes.
• Two reporting formats: DC1 and SDC2.
• Communications to HTTPS servers
• 9 status and signal indicator LEDs on the board.
• Plate dimensions: 96 x 50 mm.
• It does not require its own battery, it shares the battery of the alarm panel.
• Nominal supply voltage: 12VDC (9 to 14VDC).
• Consumption: 90 ~ 135mA.