FITZPATRICK ENGINEERING PTY LIMITED

H Series Single & Multistage Blowers

H Series Single & Multistage Blowers

Low Flow Rate, High Pressure Blowers & Exhausters for Clean Air Applications.

H 105 medium flow rateH 80 medium flow rateH 58 low flow rateH 37 low flow rateH 22 very low flow rateH 20 very low flow rate handling air, it can be used with

The H Series blowers are a family of single & multistage Centrifugal blowers for low flow rate &high-pressure applications. Typical volume flow rates range from 0.2 to 5 cu.m/sec. Design pressures raise from 2 to 18 kPa for single stage units, to 50kPa for multistage units. Most units operate at 2900rPm direct driven by 2 pole motors, & can be used for blowing or exhaust applications. H series blowers will tolerate atmospheric dust in moderation & do not have the sensitivity to dust of positive displacement compressors. For operation in extremely dusty conditions, inlet filters should be used. Performance is guaranteed to be within the class B tolerance band of British standard  BS.848 part 1 1980.