FIB Srl - Faam

Genius Pro-Battery

Genius Pro

GENIUSPRO series batteries were designed to be installed on the latest generation industrial vehicles which need high starting power, performing service energy and high cycling resistance, even in extreme conditions. This product, with his Pb/Ca/Sn plates 2,9 mm thick, represents a hybrid solution between starter and motive power batteries, in order to meet all those requirements and provide one of the highest starting power of the market. They are particularly appropriate to be installed on vehicles subject to high vibration. They have been designed for such aim with the innovative FAAM S3 - Stop Shock System with the blocking of plates in the upper and lower areas by means of special resins in order to be resistant to extreme installation and usage. They exceed the strictest V3 requirements of the EN50342-1 standard which expect 20 h of vibration at 6g and 30 Hz at a temperature of 25°C. Such batteries are equipped with an innovative double labyrinth flat cover with containment chambers and gas condensation. Each labyrinth inside the cover is heat-sealed and it allows the funnelling of emissions produced by the battery towards the exit, where there are two anti-explosion flame-arrestors (flame-retardant pads). Moreover, they are equipped with special electrodes/plates with high thickness in Pb/Ca/Sn alloy and special formulations of active matters, which not only do they require lack of maintenance but they also ensure the efficient resistance to heavier uses, with a considerable improvement of the mechanical and electric features compared to conventional batteries. It is equipped with a special fiberglass separator with newly designed grids. Through the use of special productive processes a considerable improvement in the cycling resistance with deep discharging was obtained, ensuring a notable energy with starting powers that are constant in the course of time even under critical conditions regarding vibrations and temperature.