EnviroCare International

VenturiPak Scrubber

Compact All-in-One Advanced Scrubber Technology to Provide MACT 129 Compliance

The VenturiPak Scrubber is a result of re-examining and optimizing the Venturi concept to achieve high collection efficiency at modest energy consumption (i.e. low to medium pressure drop). We can meet existing and new source MHF and FBI limits set forth under 40 CFR Part 60 Subpart MMMM and Subpart LLLL.

The PM2.5 fraction in incinerator stack off-gases is comprised of fine, submicron (

• They are the most optically active, so that even in low concentration, they affect stack opacity.
• They may contain significant concentrations of heavy metals.
• They are most difficult to capture, requiring very high energy for conventional Venturi scrubber systems or the addition of a Wet Electrostatic Precipitator (WESP).

VenturiPak Venturi ScrubberThe EnviroCare VenturiPak places the scrubber components in proper sequence rather than the traditional practice of placing a high energy Venturi directly following the quench section. The VenturiPak scrubber incorporates the latest technological advances in wet scrubbing and atomization technologies. Features of the system include:

• A quench section with effective SpiralMist nozzles and a low energy Venturi to capture over 90% of the particulate (PM10)
• Sub cooling following the quench converts any condensables into particulate and “grows” the heavy metal particulate, both usually submicron, for subsequent capture in the Venturi stage.
• Water atomization with a HydroMist nozzle at the entrance of each Venturi.
• Utilization of multiple “near true” Venturi tubes to maximize energy recovery.
• Venturi throat atomizers to maintain differential pressure setpoint with varying gas flow.
• Each component is designed for durability and is integrated into a state-of-the-art air pollution control system.