Det-Tronics

Combine the CTX10 with combustible gas sensors to create a stand-alone gas detector

Combine the CTX10 with combustible gas sensors to create a stand-alone gas detector

The model CGS sensor when used with the CTX10 is a catalytic combustible gas detector, provides continuous monitoring of combustible hydrocarbon gas and combustible hydrogen gas concentrations in the range of 0% LFL to 100% LFL. The CTX10 is third-party performance approved for methane and propane gases.

Features

• Onboard magnetic calibration/reset switch for non-intrusive calibration capability
• Compatible with constant current Det-Tronics catalytic sensors
• Direct field replacement for Det-Tronics Model 505 Transmitters
• Current level indicates fault condition and calibrate mode
• Sensor sensitivity check
• Suitable for use in a wide variety of combustible gas detection applications
• Available in 316 stainless steel and black epoxy aluminum (shown)
• Explosion-proof junction box available in aluminum or stainless steel

Technical Specifications

• INPUT VOLTAGE—
• 24 Vdc Nominal, Operating range of 18 - 30 Vdc Ripple cannot exceed 0.5 Volts P-P
• POWER CONSUMPTION—
• 4.0 watts maximum
• PEAK STARTUP CURRENT—
• Less than 0.5 ampere for < 0.2 second at 10 Vdc input, and less than 0.2 ampere for < 0.2 second at 24 Vdc input.
• OUTPUT CURRENT—
• Linear 4 to 20 mA
• CURRENT LEVEL—
• Calibration Fault: 1.6 mA
• Other Faults: 1.0 mA
• Calibration Mode: 2.0/2.2 mA in Infiniti mode, 3.4 mA in 505 mode
• Three LEDs provide the following visual annunciation at the device: