Comeca sas

GEMPRO SOFTWARE

GEMPRO SOFTWARE

GemPro is the software used to configure, to monitor and to control the GemStart5 numerical thermal protection relay. GemPro is compatible with standard PC with Windows® 7, 8 or 10 operating system.

Connection to the GemSart5 is via a standard RS232 direct cable on the LCD front face SUB-D9 pin connector.

Selecting the appropriate typical schematic based on the final application :

• DOL-E, direct start,
• DOL-E, direct start, forward and reverse
• STAR/DELTA
• DOL-L, direct start with latched contactor
• Motor operated valve
• Two speed, low start only
• Two speed
• Two speed Dahlander
• MCCB
• VSD control only
• Cut Throat VSD control only

Electrical protection setting:

Each of the LV or HV motor electrical protections associated with the selected typical schematic can be enabled or disabled, particularly during start-up and also during steady state.

Selecting the communication protocol:

• Gembus ( (proprietary communication protocol)
• Modbus RTU
• Profibus DPV1

Human Machine Interface:

• Define the configuration editor language in one click
• Define the language of the  display of the GemStart5 in one click
• Download other language
• Gemstart5 firmware update facilities