UDC-35 DIGITAL PANEL CONTROLLER
Brodersen UDC-35 Digital panel controller with three output relays. The controller is microprocessor based and fully programmable from the keypad.
Controller function:
• P, PI, PD, PID regulator with pulse width controlled output relay.
•Heating/cooling controller plus alarm relay.
• 3 individual on/off controllers.
The panel controller operates with the following input signals:
• AC/DC voltage.
• AC/DC current.
• Temperature with Pt-100/500/1000, Ni-100, thermistors and thermo- couples. The temperature measurement is fully linearized by the built-in microprocessor.
• Standard process signals.
The actual input signal type and measuring range must be specified when the panel controller is ordered.
Programmable facilities:
• Controller function (P, PI, PD, PID or on/off).
• Auto tune.
• 1, 2 or 3 setpoints.
• Setpoint hysteresis (below or above setpoint).
• Alarm point (symmetrical, below or above setpoint).
• Alarm point hysteresis.
• Input delay (0-10.0 sec.)
• Temperature measuring unit (°C or °F).
• Scale minimum/maximum.
• Decimal point position.
• Correction for temperature sensor tolerances.
• Display update time (0.2-10.0 sec.).
• Output relay mode selection with 4 different output modes.
• Delay, output relay 1,2 and 3 individually (0-50.0 sec.).
