Beamex MC6
Beamex MC6
The Beamex MC6 is an advanced, high-accuracy field calibrator and communicator. It offers calibration capabilities for pressure, temperature and various electrical signals.
The MC6 also contains a fieldbus communicator for HART, FOUNDATION Fieldbus and Profibus PA instruments.
Carry less
The MC6 is a truly multifunctional field calibrator. When going out in the field it is so much easier to carry one device with you, instead of carrying several separate devices.
We think that carrying less is a better way.
Go paperless
The MC6 is also a documenting calibrator. When it is used in conjunction with Beamex calibration software (Beamex CMX or Beamex LOGiCAL) you will experience a fully paperless calibration process. With the MC6, there is no error-prone writing of calibration results on paper, manual error calculation, or manually typing results into the software.
We think that going paperless is a better way for you.
Features
The MC6 is easy and fun to use. We added a large backlit 5.7-inch color touch screen that can be used with bare fingers, with gloved fingers or with a stylus. An intuitive user interface with multiple user interface languages is included. The connection diagrams guide you to make the correct connections. We even added multiple user interface modes for different use cases.
User interface modes
A calibrator should have advanced functionality yet remain easy to use – that is a pretty challenging situation. As a solution for this, we created different user interface modes for different use cases. For example, if you only want to measure something quickly and easily, use the simple Meter mode. If you want to document your calibration, use the Documenting calibrator mode.
Meter
Meter mode is designed for the simple and easy measurement of signals. Oftentimes, you may need to measure something quickly and easily. Often a simple multi-meter is used for this purpose, as it is easy to use. Some multifunctional calibrators are too slow and difficult to use, so it is easier to just choose a simpler meter. Meter mode in MC6 is optimized for this type of simple metering.
Calibrator
Calibrator mode is designed for calibrating various process instruments. Oftentimes, you need to check and calibrate a certain process instrument/transmitter. Transmitters typically have an input and an output. So you either need to have two devices, or a device capable of doing two things simultaneously. Calibrator mode in MC6 is optimized for this type of use.
Documenting Calibrator
Documenting Calibrator mode, working together with calibration software, is designed for process instrument calibration and documentation of the results. In today’s process plant, calibrations often must be documented. Without a documenting calibrator, documentation must be done manually, which takes a lot of precious time and is prone to error. The documenting calibrator mode in MC6 is optimized for use as a documenting process calibrator.
