Bancroft Engineering

600 WELDA-ROUND CIRCLE WELDER

600 WELDA-ROUND CIRCLE WELDER

BANCROFT’s dual arc technique provides unbeatable advantages for users who require speed and quality above all else. With the MODEL 600 Fitting welder, arc time is reduced by half due to the rotating torches, each traveling 180 degrees plus an adjustable overlap. Part distortion is greatly reduced or eliminated by starting the welds 180 degrees apart. Setup and tooling are simplified by rotating the torches rather than the workpiece.

Standard Features & Specifications

• Digital controls.
• DC rotation drive.
• Floor mounted operator console.
• Fabricated tooling arm.
• 750 lb head clamping force.
• Adjustable 8-inch vertical stroke.
• 50-550 or 100-1100 IPM BANCROFT wire drive.
• Two standard air cooled torches.
• Two independent rack and pinion torch adjusters.
• .4 to 4.8 RM rotation speed.
• 110VAC power & shop air on all machines.

Equipment Options

• Four torch configurations.
• Water cooled torches.
• Skip or partial weld.
• Auto head raise and lower.
• Arc screen.
• Rotation speed range options.
• Safety light curtains.
• Servo motors.
• Single-point disconnect.