PH001 Phase Controller

This new PH001 Phase Controller has been developed for the protection of the most difficult industrial electrical installations.

It provides effective protection and, together with the PAN45-01-00 panel, enables secure display on the front of the cabinet.

It is the only detector that allows a low voltage display in complete safety, on the front of the cabinet.

It continuously monitors:
- The presence of the 3 phases and the direction of rotation.
- Overvoltage (380 to 480V), and undervoltage (380 to 480V)
- Asymmetry or loss of neutral (5% to 25%)
The thresholds of the controlled quantities are adjustable.
- Timed release adjustable from 0.5s to 60s.
Tripping is instantaneous on loss of rotation and abnormally high overshoots.

User-friendly information on the front of the cabinet for fast connection and low voltage, through the RJ45 cable pre-equipped with the 48x48mm IP65 PAN45 panel powered by 5V.

The PAN45-01-00 displays the phase rotation (correct or incorrect), the normal undervoltage / voltage or overvoltage of each phase, the detection or tripping state of the controller.

A selection of LED colors is possible to comply with the standard display colors for each country.