Leading industrial control products manufacturer-ICP DAS has devoted in research and innovation for many years and offer our customer the best products and services continually.
Tri-band G-4500 series are M2M (Machine to Machine) mini programmable controller provided by ICP DAS, which have received high recommendation in the market. G-4500 series can be widely applied in various applications like hydrographic monitoring, intelligent power, flow meter report system and GPS car-tracking system. Now, ICP DAS releases the quad-band G-4500 series that meet the requirements of more customers. Most GSM networks operate in the 900 MHz or 1800 MHz bands. However, some countries in the Americas (including Canada and the United States) use the 850 MHz and 1900 MHz bands more often. The new quad-band G-4500 series supports not only GSM 900/1800/1900 MHz but GSM 850 MHz as well. Therefore, users can easily roam in the world's GSM system through the new product. In addition, to meet the requirements in some special environments, ICP DAS also releases the quad-band G-4500 series with plastic case and makes the product lightweight.
G-4500 could be installed anywhere and transmit the data back to the control center readily. Using G-4500 will reduce operating cost and improve the security of the transmitting process. G-4500-SIM340 would be your best choice!
If you need more information about the quad-band G-4500 series, please refer the official website of ICP DAS (www.icpdas.com) or mail to firstname.lastname@example.org. We’d love to offer you the most suitable and efficient service.
An Innovative Seismic Switch GST-43-M is hitting the world, such as fires, road/bridge damages, building collapse, etc. that really threaten people’s lives. Therefore, establishing a complete earthquake warning system becomes important and urgent to prevent any further significant damages.
People could take precautions against the earthquake disaster. To meet this kind of demand, ICP DAS and San Lien Technology cooperate to develop an innovative seismic switch--- GST-43-M.
GST-43-M is an advanced seismic switch equipped with a PC/AT embedded controller inside and running Mini OS7 operation system. GST-43-M has the brilliant feature of extreme high boot-up speed in just 0.1 second and provides the real-time monitoring and/or controlling functions for any emergency reactions needed. In addition, the built-in tri-axial MEMS accelerometers acquired vibration signal by 100Hz sampling rate and calculate the STA / LTA algorithm to achieve earthquake detection.
GST-43-M has two digital outputs(D/Os) to conduct users’ control requirements, and supports both Modbus RTU/TCP for connecting with host PC PLC, and/or HMI. GST-43-M could be applied in many different fields. For instance, install a GST-43-M around the buildings and factories. As the earthquake happens, the two built-in D/Os turn off the pointed facilities or gas switches before the magnitude attains to the destructive level. Furthermore, it could transmit the detected seismic-waves readings back to control center through Ethernet or Modbus TCP/RTU. The control center could take any emergency measures to avoid the second damage caused by the earthquake.
The concept of Intelligent Energy Conservation turns into a prevailing issue these days. Every country in the world made their efforts to develop any possible effective ways to achieve energy conservation. The conventional mechanical power meter only passively shows the readings of power consumption. Thus the Power Utilities need to gather the power amount of usage of each house unit one by one. That is not only time and cost-wasting but could also increase human errors at the same time. ICP DAS now launches a series of compact power meter - PM-2133 /PM-2134 which automatically transfer the recorded data to the control center by Modbus / RTU communication. The new compact power meter fulfills the automation of optimal power dispatch and the dream of energy conservation. In the meantime it will be more economical for the manpower arrangement of Power Utilities.
PM-213x series products are designed for general single-phase and three-phase power measurements. Based on the high accuracy (0.5%, PF=1),it can be applied both on low voltage primary side and/or medium/high voltage secondary side to ensure reliable and accurate energy consumption readings of the monitored equipments. With wired clip-on CT(wide range up to 200A), standard Modbus communication RS485 protocol setting, the most compact and low cost Smart Meters are favorable for power measurement and monitoring. As a leading innovator, ICP DAS constructs a Power Monitor and Management System (PMMS).Through RS-485 or Power Line Communication (PLC), control center could monitor and record the detailed power consumption information of all electricity equipments. ICP DAS also provides the controlling system software to help customers to analyze their power consumption status. Therefore, users could adjust and improve their power using status by means of the data from the meter.
GT-534 is a new intelligent SMS/GSM alarm controller for industry application. It transfers the counter's data periodically and supports SMS messages, voices alarm function while the pre-set events triggered. The DTMF( Double Tone Multi-Frequency) function of GT-534 is for the applications with the keypad of phones to control the local I/O. Therefore, it can be a remote control and alarm system that allows you to use your mobile phone to monitor and control at any location, and also it's more flexible for PLC/PAC/PC to implement any application through RS-232 and RS-485 interface in the GT-534. Moreover, with the SMS DBS(Database System) software provided by ICP DAS, users can manage these SMS messages from the GT-534 in PC platform easily. The built-in simple I/O linkage function helps user to do the real time control in the local field. The accompanied I/O data logger function in GT-534 could save the collected data in Micro SD card. Besides, users can quickly install GT-534 by the provided utility, no more programming procedures required.
With such comprehensive functions, GT-534 will be the best solution in many fields like machine automation, vending machine monitoring and home security application. Getting more information about GT-534, please refer to http://m2m.icpdas.com/gt-534.html or mail to email@example.com ! We’d love to offer you any supports!
GT-540P is the latest intelligent GPRS Remote Terminal unit provided by ICP DAS. It supports 850/900/1800/1900 MHz Quad-band frequency and built in a high performance 32 bits CPU and DI/O, AI function. Furthermore, GT-540P provides GPS function.
Through the RS-485 interface, GT-540P could be linked to 3 Modbus RTU devices. When the data from local I/O, Modbus RTU devices and GPS is collected, the data could be transferred to the management center through GPRS. Users have two communication ways to send the data back: one is transferring the data via GPRS. The GPRS RTU protocol developed by ICP DAS will automatically transfers data to remote M2M RTU Center by the defined time scale or DI/AI event-triggers. Meanwhile, ICP DAS also provides corresponding software include M2M RTU Center, M2M RTU Win32 API library and OPC server for RTU devices to help users building a system easily. The other way is that GT-540P also could send I/O data by e-mail.
Besides the data transmission, users could implement local I/O control through the built-in 6 DI, 2DO and 1AI function. Moreover, GT-540P also has I/O data logger function which could save I/O and GPRS data in micro SD card.
GT-540P, integrates the GPS and GPRS wireless function, is ideal for many applications such as remote monitor systems and transportation monitor, especially for vehicle management System. GT-540P brings users more complete functions and makes the applications more diversified!
I-2533 is a local CAN bridge that connects two CAN bus systems via fiber transmission medium. I-2533 complies with the ISO 11898-2 standard and strengthens itself with 2500 Vrm iCoupler isolation on CAN side to ensure the completeness of data transmission. The wide temperature design supports I-2533 to operate in the environment from - 25 ~ 75.
Longest Transmission Distance up to 2 km and Highest Baud Rate up to 1 Mbps
I-2533 supports the maximum transmission distance up to 2 km and the highest baud rate up to 1 Mbps. No matter what the baud rate CAN network uses, it won't affect the transmission distance. That means, even though the CAN network uses the highest baud rate 1 Mbps, the maximum transmission distance could still be 2 km.
Two Isolated CAN network design
The two isolated CAN network could operate independently. If there is bus error on one CAN bus side of I-2533, it will not induce any impact on the other CAN network.
Setting the baud rate depends on the user's requirement
Users could set the baud rate of CAN network based on their applications. Then the two CAN network could exchange the data through I-2533.
Moreover, ICP DAS provides the utility tool for user-defined baud rate setting and message filter configuration. Through the utility tool, users could set the baud rate they want and customizes the message filter. When the two CAN network with different baud rate connects, the filter could filter unnecessary message and reduce the bus loading of the network.
The perfect functions make data transmission more reliable. With the trend that many users implement the numerous controllers, sensors and motors through CAN bus, I-2533 would be your best choice for fiber transmission solution! For more product information, you could refer to or mail to We’d offer you more information and supports!
Facing the worldwide trend in energy saving, carbon emissions reduction and the rising of labor costs, industries in all fields are all trying to bring automation to a higher level and enhance the performance of their systems or equipments. The PAC controller leader-ICP DAS announces the Web-based intelligent PAC controller- WISE v1.1 - a perfect automation solution that is easy-to-use, easy-to-maintain, affordable, foster development process, equips with all required features and comes with intuitive web-based tools. It takes only 4 steps to complete the logic rules design for the controller: Start Web Browser à Connect to WISE’s Web Server à Edit Logic Rule Setting à Download Logic Rule to WISE. By WISE, user can minimize the investment in time, labor and cost spent on automation system development.
WISE System Architecture
Why WISE ?
WISE features Easy-to-Use Web Interface, provides wide range I/O modules to choose from, equips with full-functioned software tools and enables seamlessly integration with SCADA package…etc, therefore, will be your best choice in Building Automation, Factory Automation, Machine Automation, Equipment Remote Maintenance/Diagnosis/Monitoring, Facility management and Environment Monitoring applications. For more information about WISE product, please visit WISE WEB site (http://wise.icpdas.com).
Along with the rapid progress in technology, people want to interact with the facilities or electrical devices in a simple way. Therefore, HMI device such as digital displayer is playing a more and more important role in prevailing Human Machine Interaction. The industrial control products leader, ICP DAS, has officially lunched a series of rugged home/building automation products which conform to industrial specifications - TouchPAD. The TouchPAD series is a brand-new controller with 2.8" high resolution TFT color touch screen and outlined with the same size to fit in regular electrical wall-mount outlet.
Furthermore, by Modbus TCP protocol, TouchPAD can be linked to the WISE/ET-7000/ PET-7000/ I-7000/ M-7000 series modules and integrates with SCADA software easily. Users can real-timely monitor the status of facilities or electrical devices from the displayer of TouchPAD.
To accomplish the real Human Machine Interface (HMI) requirements, not only touch sensor technology, but the GUI tool are also required. The conventional GUI tool is difficult to implement so that the users have to invest a lot of efforts, time and money to learn and develop their own application. To solving this annoying problem, ICP DAS provides HMIWorks, the free dedicated developing tool for TouchPAD which provides plenty of widgets and templates to help users complete all the development jobs. Under the WYSIWYG (What You See Is What You Get) design concept, HMIWorks can totally satisfy the requirements for users.
To get more information of TouchPAD, please visit Or maito:we’d love to offer you any supports!
TouchPAD Series-TPD-280-W/TPD-283-W Advanced Features
As global internet popularity gains large growth, connecting your equipments with internet also becomes important and necessary.
The tDS-700 series is born for the trend. It is a Serial-to-Ethernet device server designed to turn the serial RS-232/422/485 devices to network-ready and make users can monitor these devices and obtain the data via internet. It helps all facilities in RS-232/ 422/485 interface linking to the internet with ease.
tDS-700 series featured with a powerful 32-bit MCU to enable efficient handling of network traffic. The built-in web server provides an intuitive web management interface for users to modify the settings of the module such as DHCP/Static IP, gateway/mask and serial ports through web browsers. The design of low power consumption not only reduces dispensable resource waste but protects our environment as well. ICP DAS offer our customers VxComm Driver/Utility, an utility with easy-to-use configuration interface that can be used to quickly create and map virtual COM ports to tDS-700 modules.
To get more information about tDS-700 series, please visit Or maito:we’d love to offer you any supports!
WinPAC-5000 series is a brand-new palm-size PAC launched by ICP DAS. It is equipped with a powerful CPU PXA270 (520 MHz) and Windows CE.NET 5.0 operation system inside. Various connectivity such as VGA, USB, Ethernet, and RS-232/485 interface are also provided. Furthermore, users can expand the I/O function through the equipped I/O expansion bus.
The new compact PAC featured with hard real-time capability, small core size, fast boot speed, and achievable deterministic control function. For hardware expansion, it also supports an I/O expansion bus. ICP DAS provides more than 10 XW-boards for our customers to expand the I/O functions in WinPAC-5000 series!
With those advantages of PLCs and Windows PCs, WinPAC-5000 series give you the most economic and efficient solution!
To get more information about WinPAC-5000 series, please visit Or maito:we’d love to offer you any supports!
ICP DAS is going to attend the 14th SecuTech Expo Taipei, 2011 at Booth No.
M900, M902 from April 20th to April 22nd. Recently the devastating earthquake hit the
whole world in high frequency. Everyone is searching for the better
security systems to reduce lost come from the disasters. ICP DAS
provides the solution, GST-43-M, a complete earthquake warning
& real-time reaction system to prevent any significant damages
from earthquakes. For instance, as the earthquake happens, the
built-in DOs send commands to turn off the pointed facilities or gas
switches before the magnitude attains to the destructive level and
also open the door to ensure people having the smooth escaping
lines. Furthermore, it transmits the detected seismic-waves readings
back to control center through Ethernet or Modbus TCP/RTU for
the needed emergency measures taking to avoid the secondary
damage caused by the events.
ICP DAS always aims to provide the best solution and services to you. Please visit us for the details and look forward to seeing you at the show.
Date of Exhibition: April 20th to April 22nd, 2011
Venue: Taipei World Trade Center, Nangang Exhibition Hall, Taiwan
Exhibition Pavilion: Intelligent Buildings and Smart Homes (4th Floor)
Booth No.: M900, M902