New POSYS® 3104 PC/104 Motion Controller

The new POSYS® 3104 is a PC/104 Motion Controller for 4 axes. The controller outputs pulse & direction signals or CW/CCW signals and is therefore predestined for use with microstepping and stepper motors. Additionally stepper-like servo systems can be used when capable to of using the pulse & direction signals. Update rates as with other motion controllers don't exist. All axes of the POSYS® 3104 work simultaneously.

New POSYS® 1800-P PC/104 Motion Controller

The POSYS® 1824-P is a state-of-the-art 4 axes PC104-Bus motion controller supporting multiple host connection modes and motor types. The POSYS® 1800-P supports parallel-bus via PC/104-Bus and capable of being used as a standalone controller via serial communication RS232 or CAN 2.0B only supplying 5 VDC.

New POSYS® 3004 Standalone Motion Controller

The new POSYS® 3004 is a standalone motion controller for 4 axes. Its build equals the PC/104-Format. The special feature of this card is that it has an integrated PC with DOS compatible RTOS. In addition, Web, FTP and Telnet servers are integrated and can be accessed via one of the built-in interfaces (1x 10/100 Mbit Ethernet, 1x RS232, 2x configurable RS232/RS485 ports, 1x USB 1.1 and 2x CAN 2.0b).

New POSYS® 1900-P PCI-Bus Motion Controller

POSYS Motion Control now introduces its new advanced motion controller POSYS® 1900-P for brushed/brushless servo, microstepping and stepper motors and Piezo/Ceramic motors, each axis indivually configurable. The PCI-card is available in 4 axes configurations. The servo loop update rate is for a single axis 51.2 ?sec., 4-axes configuration doesn't take longer than 256 ?sec. to update periodically all axes. For more axes additional cards can be added to achieve higher axes configurations.

New POSYS™ PCI-Bus Motion Controller

POSYS Motion Control GmbH & Co.KG now introduces its new advanced motion controller POSYS™ 9xx for brushed/brushless servo, microstepping and stepper motors. The PCI-card is plug-n-play capable and available in 2 or 4 axes configurations. For more axes additional cards can be added to achieve higher axes configurations or to allow mixed servo/stepper usage.

New POSYS™ PC/104-Bus Motion Controller

POSYS Motion Control GmbH & Co.KG now introduces its new advanced motion controller POSYS™ 8xx-B for brushed/brushless servo, microstepping and stepper motors. The PC/104-card is available in 1, 2 or 4 axes configurations. For more axes additional cards can be added to achieve higher axes configurations or to allow mixed servo/stepper usage.